Applications:

The ITK Indoor Termination Kit is for use indoors. This is a Class I termination, i.e. located indoors in controlled environmental conditions and subject to light condensation.

The ITK Indoor Termination Kit is designed to connect polymeric insulated cable to equipment.

Suitable for operation up to 22kV.

Design:

The ITK is for copper screened cable with:

• Extruded easy strip semi--conductive screen
• Bonded extruded semi-conductive screen
• fabric tape

The unique tube composition and all incorporating silicone housing make this the easiest to install Termination on the market.

Termination Comprising:

• All kits supplied as a set of three terminations (available singularly if required)
• A bolted cable lug (click here for lug details) if required
• Shear Lugs if required
• Water Sealing mastic
• A silicone tube
• A conductive EPDM ring
• Instructions

Click here for the sizing chart.

Sizing: 

• The ITK will accommodate conductor sizes up to 630mm2.
• With cable insulation diameters up to 50mm.
• For complete product part numbers matched to your specific cable, please contact Australmold.

Testing: 

• The ITK meets the requirements of CENELEC HD 629.1 S1.
• Meets AS2629-1983 & AS4805 Part 1. 
• Test reports are available, please contact Australmold.